2018 April New Cisco 642-887 Exam Dumps with PDF and VCE Free Updated Today! Following are some new 642-887 Real Exam Questions:
1.|2018 Latest 642-887 Exam Dumps (PDF & VCE) 190Q&As Download:
https://www.braindump2go.com/642-887.html
2.|2018 Latest 642-887 Exam Questions & Answers Download;
https://drive.google.com/drive/folders/0B75b5xYLjSSNeXNhZVlPaDA3dDA?usp=sharing
QUESTION 138
Refer to the exhibit. IT administrators report packet loss on the critical applications coming with CoS 4. Which option is the appropriate configuration to have a lower drop probability when the packets are processed using DSCP values?
A. set ip dscp af22
B. set ip dscp af41
C. set ip dscp af13
D. set ip dscp af32
Answer: B
QUESTION 139
An engineer looks at packet captures and sees that the MPLS header field of a packet indicates a bottom of stack field of 0. What can the engineer conclude from this information?
A. The packet is an AToM packet
B. One label is on the packet
C. At least one more MPLS label is on the packet
D. No labels are on the packet
Answer: C
QUESTION 140
Which option is the correct definition of the LB on a Cisco router?
A. a table used by switching functions to forward labeled packets
B. a table that holds the next hop for destination prefixes
C. a label-based adjacency table
D. a table that stores remote and local label bindings
Answer: A
QUESTION 141
Which two values must be specified in a Cisco NBAR configuration? (Choose two.)
A. port number
B. IP precedence
C. neighbor discovery address
D. CoS
E. transport protocol
Answer: AE
QUESTION 142
An engineer is deploying CB-WRED across the entire core network to enforce the previously deployed CBWFQ and decides to change the WRED default to make it work with DSCP. Which policy-map command enables this new profile on regular Cisco IOS routers?
A. random-detect
B. random-detect dscp value
C. random-detect dscp based
D. random-detect precedence value
Answer: C
QUESTION 143
Which two protocols facilitate label bindings by neighboring routers? (Choose two.)
A. IS-IS
B. LDP
C. OSPF
D. EIGRP
E. BGP
Answer: BE
QUESTION 144
Refer to the exhibit. A network engineer who is working for an ISP wants to override the QoS that comes from the customer. The engineer wants to set a QoS value of 5 for all traffic.
What are two reasons why the configuration is not working? (Choose two.)
A. The service-policy command should point to the service policy, not to the class map
B. The set command should reference CoS instead of MPLS EXP bits
C. The service-policy configuration should be set as output
D. The policy-map configuration needs to reference class-map Custom1
E. The number 350 in the xconnect command should appear after the encapsulation type
Answer: AD
QUESTION 145
Which two values are class-selector DSCP values? (Choose two.)
A. 001001
B. 000111
C. 111000
D. 100000
E. 000001
Answer: CD
QUESTION 146
Which IOS XR Software feature supports establishing point-to-point and point-to-multipoint TE tunnels traversing multiple IGP areas and levels allowing headend and tailend routers to reside in different areas?
A. loose hop reoptimization
B. FRR mode protection
C. interarea support
D. loose hop expansion
Answer: B
QUESTION 147
Which option describes the IPv6 flow label field?
A. a 3-bit field used for marking a traffic flow
B. an 8-bit field used for labeling a traffic flow
C. a 20-bit field used to tag a traffic flow throughout the network
D. an 8-bit field out of which the first 6 are used to classify packets
Answer: C
QUESTION 148
What is a crucial LDP default operating behavior?
A. LDP uses the solicited mode by default. An LDP label request is sent to the FIB next hop LSR. When the egress router receives the request, it returns message with all the label-mapping information for the LSP is generated.
B. LDP establishes a TCP session between the PE routers, thus providing label mapping for the LSP
C. LDP uses downstream unsolicited mode by default. An LSR advertises label mappings to peers without being asked
D. LDP uses UDP-confirmed messages to establish sessions between PE ingress and egress routers. The UDP messages encode the label information for each LSP and sub-LSP link
Answer: C
!!!RECOMMEND!!!
1.|2018 Latest 642-887 Exam Dumps (PDF & VCE) 190Q&As Download:
https://www.braindump2go.com/642-887.html
2.|2018 Latest 642-887 Study Guide Video:
Braindump2go | Testking | Pass4sure | Actualtests | Others | |
$99.99 | $124.99 | $125.99 | $189 | $29.99/$49.99 | |
Up-to-Dated | ✔ | ✖ | ✖ | ✖ | ✖ |
Real Questions | ✔ | ✖ | ✖ | ✖ | ✖ |
Error Correction | ✔ | ✖ | ✖ | ✖ | ✖ |
Printable PDF | ✔ | ✖ | ✖ | ✖ | ✖ |
Premium VCE | ✔ | ✖ | ✖ | ✖ | ✖ |
VCE Simulator | ✔ | ✖ | ✖ | ✖ | ✖ |
One Time Purchase | ✔ | ✖ | ✖ | ✖ | ✖ |
Instant Download | ✔ | ✖ | ✖ | ✖ | ✖ |
Unlimited Install | ✔ | ✖ | ✖ | ✖ | ✖ |
100% Pass Guarantee | ✔ | ✖ | ✖ | ✖ | ✖ |
100% Money Back | ✔ | ✖ | ✖ | ✖ | ✖ |