[New 300-365 Dumps]300-365 VCE and 300-365 PDF 122Q Dumps Free Download in Braindump2go[83-93]

2018/September Braindump2go 300-365 Exam Dumps with PDF and VCE New Updated Today! Following are some new 300-365 Real Exam Questions:

1.|2018 Latest 300-365 Exam Dumps (PDF & VCE) 122Q&As Download:

https://www.braindump2go.com/300-365.html

2.|2018 Latest 300-365 Exam Questions & Answers Download:

https://drive.google.com/drive/folders/0B75b5xYLjSSNZTJ3Y0Z5b0NFRFE?usp=sharing

QUESTION 83
A wireless printer has been configured with a static IP address. Which action does the Cisco WLC take in response?

A. It does not transfer AAA requests to the printers.
B. It does not transfer ARP requests to the printers.
C. It does not transfer join requests to the printers.
D. It does not transfer location information to the printers.

Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/wireless/wireless-lan-controller-software/118833-wlcdesign-ftrs-faq.html

QUESTION 84
Which option is a physical entity in converged access wireless network design?

A. mobility domain
B. switch peer group
C. mobility group
D. mobility agent

Answer: C

QUESTION 85
A sporting arena has a new wireless network and finds that clients are not connecting to their nearest access point. Which setting can be enabled to minimize this behavior and reduce the AP view of channel utilization?

A. Use an RF profile with an RX-SOP threshold.
B. Enable Band Select
C. Enable Client Balancing
D. Turn on CleanAir

Answer: A

QUESTION 86
Which option is a calibration of a Cisco MSE deployment limited to when that deployment is using the linear point collection method?

A. rogue AP
B. associated 802.11 a/n clients
C. RFID tag
D. associated 802.11 b/g/n clients

Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/8-0/MSE_CMX/8_0_MSE_CAS/7_4_MSE_CAS_chapter_01010.html

QUESTION 87
When CAPWAP protocol runs over IPv4, which UDP port numbers are used for control and data traffic,respectively?

A. control 5246, data ?UDP-Lite(IP Protocol 136)
B. control 5247, data ?5246
C. control 5246, data ?5247
D. control 5247, data ?UDP-Lite(IP Protocol 136)

Answer: C

QUESTION 88
An engineer has deployed a WLAN in a high-density auditorium and expects the number of clients to grow.
Which WLC configuration can be used to increase the IP space without any service disruptions?

A. dynamic interface
B. interface group
C. AP group
D. RF group

Answer: B

QUESTION 89
A security engineer wants all guest users to be terminated on the DMZ of their firewall. Which two configurations must be implemented to fulfill this new requirement? (Choose two.)

A. TCP port 16666 and 16113 in an ACL on the controller
B. UDP ports 16666 and IP protocol 97 on the firewall
C. a mobility group with a controller in an isolated network on the firewall
D. an RF group with a controller in an isolated network on the firewall
E. UDP ports 1812 and 1645 in an ACL on the controller

Answer: BC

QUESTION 90
Which two access categories could use TXOP value higher than 0, as per 802.11e standard? (Choose two.)

A. AC_VO
B. AC_BK
C. AC_VI
D. AC_BE
E. AC_NC

Answer: AC
Explanation:
https://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob30dg/WANQoS.pdf

QUESTION 91
A wireless engineer is configuring a Cisco MSE by using the automatic installation script. Which two parameters are mandatory and must be configured at least once? (Choose two.)

A. Ethernet interface
B. hostname
C. GRUB password
D. domain name
E. NTP server

Answer: AB
Explanation:
Please note that the following parameters (indicated by *) are mandatory and must be configured at least once.
-> Hostname
-> Network interface eth0
-> Timezone
-> Root password
-> NCS Communication username
-> NCS Communication password
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/Virtual_appliance/ Installation_Config_Guide/Cisco_MSE_VA_Config_Guide/Installing_MSE_Virtual_Appliance.html

QUESTION 92
Clients on access points within an AP group are not receiving multicast traffic after roaming to another AP within the AP group. Which configuration must be done to maintain multicast connectivity?

A. Enable an ACL on the router that serves the VLAN or subnet.
B. Enable NAC out-of-band support.
C. Enable a unique NAS-ID for the AP group.
D. Enable IGMP snooping.

Answer: D
Explanation:
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/81671-multicastwlc-lap.html

QUESTION 93
Which two parameters are used by MSE location analytics to determine the behavior of a Wi-Fi device?
(Choose two.)

A. the transmit power
B. the Wi-Fi channel
C. the dwell time
D. the path choice
E. Layer 2 roaming

Answer: CD
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/3350/7-4/Location_Analytics_Service/Guide/ Cisco_Location_Analytics_Service_Configuration_Guide/Location_analytics_overview.html


!!!RECOMMEND!!!

1.|2018 Latest 300-365 Exam Dumps (PDF & VCE) 122Q&As Download:

https://www.braindump2go.com/300-365.html

2.|2018 Latest 300-365 Study Guide Video:

https://youtu.be/dX3mpZXC43g

Braindump2go Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99/$49.99
Up-to-Dated
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back